Professional development, production and sales of feed machinery products and accessories

TECHNOLOGY
__

Your position:
Homepage
/
/
/
The main factor of a die' service time

The main factor of a die' service time

  • Categories:Product Knowledge
  • Author:
  • Origin:
  • Time of issue:2019-01-18 16:22
  • Views:4

(Summary description)★ The lifespan of a die depends on many factors:

the composition of the raw material (formulation)
the characteristics of the raw materials used in the feed the fat content
the particle size of the mash
the moisture content before pelleting
the heat conditioning of the mash
the pellet mill controls (i.e. automatic or manual)
many others.
composition
High fibre formulations such as rabbit feed are harder to pellet and therefore the die will have a much shorter lifespan. As a comparison, for instance, if the lifespan of a die is 1 when used to make rabbit feed, it would be 4 for cattle feed and 5 when used on poultry feed.

raw material characteristics
Raw materials containing silica or sand wear dies more rapidly.
Fat content
Formulas containing 1.5-2% fat run smoother and are less abrasive since the fat acts as a lubricant.
Particle size of the mash
Mashes with large particle sizes are more abrasive.
Moisture content and heat conditioning of the mash A poorly conditioned mash is drier and harder to pellet.
Press control
The operator should regularly check for wear on deflectors and scrapers and also on the roll adjustment to avoid uneven wear on the die leading to inefficient pelleting. Conditioner paddles must not be worn to ensure efficient pre-conditioning. Steam traps and filters ensure that no condensate passes through to the conditioner.

Glossary

The main factor of a die' service time

(Summary description)★ The lifespan of a die depends on many factors:

the composition of the raw material (formulation)
the characteristics of the raw materials used in the feed the fat content
the particle size of the mash
the moisture content before pelleting
the heat conditioning of the mash
the pellet mill controls (i.e. automatic or manual)
many others.
composition
High fibre formulations such as rabbit feed are harder to pellet and therefore the die will have a much shorter lifespan. As a comparison, for instance, if the lifespan of a die is 1 when used to make rabbit feed, it would be 4 for cattle feed and 5 when used on poultry feed.

raw material characteristics
Raw materials containing silica or sand wear dies more rapidly.
Fat content
Formulas containing 1.5-2% fat run smoother and are less abrasive since the fat acts as a lubricant.
Particle size of the mash
Mashes with large particle sizes are more abrasive.
Moisture content and heat conditioning of the mash A poorly conditioned mash is drier and harder to pellet.
Press control
The operator should regularly check for wear on deflectors and scrapers and also on the roll adjustment to avoid uneven wear on the die leading to inefficient pelleting. Conditioner paddles must not be worn to ensure efficient pre-conditioning. Steam traps and filters ensure that no condensate passes through to the conditioner.

Glossary

  • Categories:Product Knowledge
  • Author:
  • Origin:
  • Time of issue:2019-01-18 16:22
  • Views:4
Information

★ The lifespan of a die depends on many factors :

  • the composition of the raw material (formulation)
  • the particle size of the mash.
  • the moisture content before pelleting.
  • the heat conditioning of the mash.
  • the pellet mill controls (i.e. automatic or manual).
  • composition ratio.
  • the composition of the raw material (formulation).
  • the daily maintenance.
  •  High fibre formulations such as rabbit feed are harder to pellet and therefore the die will have a much shorter lifespan. As a comparison, for instance, if the lifespan of a die is 1 when used to make rabbit feed, it would be 4 for cattle feed and 5 when used on poultry feed.
  • raw material characteristics
  • Raw materials containing silica or sand. dies will wear more rapidly.
  • Fat content.
  • Formulas containing 1.5-2% fat run smoother and are less abrasive since the fat acts as a lubricant.
  • Mashes with large particle sizes are more abrasive.
  • Moisture content and heat conditioning of the mash (a poorly conditioned mash is drier and harder to pellet.)
  • Press control

The operator should regularly check for wear on deflectors and scrapers as usual and also on the roll adjustment to avoid uneven wear on the die leading to inefficient pelleting. Conditioner paddles must not be worn to ensure efficient pre-conditioning. Steam traps and filters ensure that no condensate passes through to the conditioner.

                                           

 

                                            

Scan the QR code to read on your phone

Service Hotline

SERVICE HOTLINE
+86 028-38560186

add

ADDRESS
Dongbao District, Meishan City,Sichuan Province,Shanbao Machinery Mould Co., Ltd.

e-mail

SERVICE MAILBOX
vigorzhouwj@gmail.com

Shanbao Company has established the quality policy of “Customer Satisfaction, Integrity Management, Innovation and Development”, and integrates the essence of “practical and risky” corporate culture, embodying the spirit of “joining and granulating with customers” in production and service.

NAVIGATION

WeChat public number

Copyright © 2019  Meishan Shanbao Machinery Mould Co., Ltd. 

SEARCH
搜索